Shark SN-7 Instructions

Snark inst SN7_pages 8/8/12 2:49 PM Page 1
white "waiting" light at the left side of the
LCD display. This tells you the tuning function
is engaged and you are ready to tune. Turning
off the tuning function (by pressing the foot
switch again) will cause the waiting light to
disappear from the display.
Strike any note and the tuner will display
the note played and whether the note is
sharp or flat. If flat, one of the red bars on the
display will light up. If sharp, one of the
yellow bars on the display will light up. If in
tune, the green bar will light up. If the green
bar is lit and you see a brief flashing of the
adjacent red or yellow bar, it means the note
is just slightly out of tune. djust the tuning
on your instrument to dial in a perfect tune.
PED LBO RD NEIGHBORS
If using the Snark in your sound "chain",
please be aware that pedals with high gain or
incorporating buffers that are placed adjacent
to the Snark can cause the click of the Snark
foot switch to become accentuated. So you
may wish to consider where you place the
Snark in your chain. Or you may wish to
connect the Snark to an /B box, to the
"tuner out" jack of your volume pedal, or to
the "stereo out" jack of one of your pedals.
Enjoy!
"Chord Secrets of
the Pros"
Secrets Chords Even
Many Pros Don't Know!
FREE!
When You Register
Your Warranty On-Line!
Go to: www.snarktuners.com
and click on "Warranty"
This product complies with FCC Part 15 rules. Operation
of this product is permitted in US provided this product
does not cause harmful interference and provided this
product accepts interference from other devices, even if
that interference is detrimental to performance of this
product.
EEC gent: John Hornby
Skewes & Co., Ltd.
Salem House, Parkinson
© Snark 2012
pproach, Garforth,
Leeds LS25 2HR UK Printed in China
SN-7
PED L TUNER
INSTRUCTIONS