Westinghouse JSG20-10N1 Instruction Manual page 10

aluminum
seal foil
a. flue installed through the window
• Use concrete to seal the gap between the flue and the wall. If the flue is installed through the
glass, use the glass glue to seal the gap tightly.
• Cautions for flue installation
• Please use the flue supplied by our company, other flue with different model and specification
is strictly forbidden. Don't change the speficication of the flue.
• The whole lenght of the flue (A+B+C) should be less than 2m, and the number of the elbow
should not be more than 3, otherwise it will cause results like explosive combustion, flame out
etc... (Fig. 13)
• The installation of the flue must be correct, otherwise the waste gases will flow back and
cause danger. (Fig. 14)
elbow
steight flue
glass glue
aluminum
seal foil
b. flue on the side of the heater
INSTALLATION
elbow
concrete
aluminum
seal foil
sreight flue
Fig. 12
Fig. 13
elbow concrete
sreight flue
c. flue on the back of the heater