Code Retrieval; Sleep Feature - RCA RCU403 User Manual

RCU800B_IB_REVB.qx4 2/11/04

Code Retrieval

If you used one of the Code Search methods to program your remote, follow the steps below to find out
which code is compatible with your component. Finding the actual code and writing it down will save
you time if you ever need to program the remote again (e.g., if programming is lost when you change
the batteries).
CODE INDICATOR
SEARCH LIGHT
DBS• VCR• TV
CABLE DVD
(BLINK)
CODE
SEARCH
(OFF)
1 2 3
4 5 6
7 8 9
0
(BLINK)
Sleep Feature (Select Models Only)
This feature will automatically turn off your TV at a duration you choose from 1 to 99 minutes.
INDICATOR
SLEEP
LIGHT
1 2 3
4 5 6
7 8 9
0
SLEEP (BLINK)
OR
ON•OFF
RCU403
13:05 Page 25
1. Press and hold the CODE SEARCH key until the
indicator light illuminates. Then release the
CODE SEARCH key.
2. Press and release the component key that matches the
component's code you are retrieving (TV, VCR•DVD, or
DBS•CABLE). The indicator light blinks once and
then remains lit.
3. Press and release the CODE SEARCH key. The
indicator light turns off.
4. Starting with 0 on the keypad, press the number keys
in order (0-9) until the indicator light blinks.
5. The number that causes the indicator light to blink is
the first digit of your code.
6. Repeat step 4 until you have retrieved all three
numbers of the code.
7. Refer to the code box to write down the code for
your component within the Direct Entry Section
(pages 22-23) for the component just programmed.
PROGRAMMING SLEEP FEATURE
1. Press and hold the SLEEP key until the indicator light
illuminates. Release the SLEEP key.
2. Enter time in minutes using the numerical key pad. The
indicator light should turn off. (Minute 1 thru 9: press 0
before the actual number. Maximum: 99 minutes).
3. Leave remote aimed at television. (Sleep Feature will not
work unless remote is left aimed at television.)
CANCELING THE SLEEP TIMER
The Sleep Timer program will be canceled and reset to zero
by either of the following.
1. Press and hold the SLEEP key until the indicator
light blinks.
2. Press the ON•OFF key, turning TV off.
25