Advertisement
Auto Setup
Language
Signal Type
Automatic Search
: Select
: Adjust
fig.3
– (DISPLAY)
Number
buttons
SETUP/
TV MENU
▲/▼/◀/▶
ENTER
SCREEN
SIZE
Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at 1-800-336-1900 so that we
may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.
52D0207A_QS.indd 2
52D0207A_QS.indd 2
Set Up Your TV/DVD
Make sure you have already connected your TV/DVD to devices and a signal source, plugged in the
TV/DVD, and put batteries in the remote.
Now, turn on the TV/DVD and start the setup. (POWER indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to appear on screen.)
English
Cable
Start
Starting setup
The Starting Setup menu (fig.3) appears the first time you turn on the TV.
• Set the on-screen language
(If English is your preferred language, you can skip below and advance to the next step.)
◀
Press
or
• Choose the Signal Type (Air/Cable selection)
▲
Press
or
(If you connected Cable TV service to your ANT jack, you can skip below and advance to the next step.)
◀
Press
or
• Automatic Search
▲
Press
or
The search takes some time as it is looking for analog, digital and digital sub channels. Once the search is
complete, the TV/DVD tunes to a channel.
– For more information, see OWNER'S MANUAL, page 15 –
Operate Your TV/DVD
Using the DVD player
To use the DVD player, press
slot load with disc's label facing towards you. If necessary, press
mode, press TV/DVD.
TV/DVD
The DVD player can play DVD discs, Audio CD discs, CD-R/RW discs with mp3, Windows Media-formatted
content, and JPEG files.
Using the Menu System
The
SETUP/TV MENU
DVD
DVD player's main menu, while a disc is playing first press
MENU
▼
or
to scroll up or down;
A disc is capable of having an on-screen menu that is separate from the DVD player's main menu. The disc
menu might only contain a list of the titles and chapters, or it may allow you to change features such as
language and playback settings. To access the disc menu, press
PLAY
Watching TV
STOP
Entering Channel Numbers
Digital channels can have both primary channels (like the analog channel number) and sub channels. If 15 is the
primary channel and 1 is the sub channel the channel looks like 15-1 on screen. To tune to a such channel, press
INPUT
the first 3 digits, then press the
SELECT
then press ENTER.
Changing Screen Formats
Your TV allows you to change the format of the picture you've viewing by pressing the
remote control. Depending on the type of signal you're viewing, you might not be able to change the format.
Viewing Devices Connected to Your TV/DVD
To view devices connected to your TV/DVD, first make sure you are in TV mode. Press
Choose the input where you connected the device.
Your choices are TV, Video, Component, HDMI, PC or DVD (DVD mode).
▶
until your language is shown.
▼
to select "Signal Typel"
▶
to choose "Air" (this is for antenna users).
▼
to select "Automatic Search", then press
TV/DVD
("DVD" appears at the bottom of the screen). Insert a disc into the side
button accesses both the DVD player's main menu and TV's menu. To access the
◀
▶
or
to scroll left or right; and
–
(DISPLAY) button, followed by the remaining 3 digit, as 0, 1, 5, –, 0, 0, 1,
▶
or
ENTER
to begin the "Automatic Search".
PLAY
to play the disc. To switch back to TV
STOP
and then press
SETUP/TV
ENTER
to make selections.
DVD
MENU.
SCREEN SIZE
INPUT
▲
MENU. Use
on the
SELECT.
6/12/09 1:47:44 PM
6/12/09 1:47:44 PM
Advertisement
