Maintenance; Pat Testing - Prem-I-Air EH1414 Manual

Select the airflow speed by pressing either the LO, MI or HI buttons (for
low, medium, or high airflow)
The OSC. button controls the oscillation of the louvres.
The COOL button controls the cooling and humidification of the air.
The water level is visible through the indicator window on the front panel.
When the water level reaches MIN fill the tank as above.
Timer: To use the timer, rotate the timer dial so that it indicates the
number of minutes for which the appliance is required to run.
After the selected number of minutes the appliance will switch off.
At time of going to press, the average cost of electricity is £0.11 per unit
(kilowatt-hour). The amount you are being charged will be shown on your
electricity bill.
At this cost, the EH1414 will cost 18p per day to run,
Clean the outside of the appliance with a soft damp cloth, with a drop of
washing-up liquid.
Clean the filter every 20 to 30 days of use - remove the filter cover from
the rear panel and remove the filter. Wash the filter in hand-hot water to
which a drop of washing-up liquid has been added. When thoroughly dry,
replace the filter in the appliance. Replace the filter every year.
If the mains lead is damaged, it must be replaced by the manufacturer or
and authorised service centre. If the mains plug needs to be replaced,
Brown (live)
Blue (neutral)
When used in a workplace, this product must be safety-tested yearly by a
qualified electrician (PAT Tested) in order to comply with the Electricity at
Work Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.
OPERATING COSTS

MAINTENANCE

proceed as follows:
Fuse
(3 Amp)
• Connect the brown wire to the terminal labelled
"L".
• Connect the blue wire to the terminal labelled "N".
• Make sure that the cord-grip is positioned
correctly (over the outer sheath of the cable) and it
fully tightened.
If the plug is supplied with a 13A fuse, replace it
with a 3A fuse.

PAT TESTING.

Page 3