Startup; Set The Power To On; Configure The Meter - Hach H160G User Manual

Figure 7 Display
1 Data log indicator
2 Temperature and data values
3 Measured value
4 Stabilization lock
5 Hold indicator
6 ISFET probe indicator
7 Measurement mode
8 Measurement units
9 Storage options

Startup

Set the power to on

Push the power button to set the power to on or off. Make sure that the power supply (AC power or
battery power) is correctly installed.

Configure the meter

Do the operations in order:
1. Set the power to on.
2. Push SETUP to put the meter in setup mode.
3. Use the arrow keys to select an option, then push ENTER:
Option Function
CLr ALL Clear calibration
CAL points
int Data log interval
year Year
14 English
10 Data storage memory location
11 Automatic temperature compensation (ATC) value
12 Calibration mode indicator
13 Temperature unit
14 Low battery indicator
15 Bluetooth
16 PC data transfer icon
17 Setup mode
Description
Erases all the calibration points. Make sure to calibrate the meter.
Keeps up to 999 data points in intervals from 1 to 1999 seconds (default =
10) in the data log.
Use the number keys to enter the correct year.
(pH, conductivity, TDS or salinity)
™
connection indicator
1