Tape Player; Playing A Tape; Continuous Play; Recording - RCA fm radio tuner User Manual

RS2610-EN 6/14/02

Tape Player

Playing a Tape

Tip: You can play a tape from either deck.
1. Press SOURCE repeatedly to select TAPE.
2. Press the cassette door to open it.
3. Insert a tape into the door and push the door
closed.
4. Press BAND/DECK 1/2 to select deck 1 or 2.
5. Press SKIP FORWARD
WARD to position the tape to the desired
starting position.
6. Press PLAY to begin playback.

Continuous Play

1. Press PRESET UP
enable continuous play. "C" will appear before the
counter.
2. Insert cassette tapes into deck 1 and 2.
3. Press BAND/DECK 1/2 to select the deck to play
first.
4. Press PLAY to begin continuous playback.
5. Press PRESET DOWN
Tape Counter
You can keep track of tape position with the tape
counter. Press PROG. to reset.

Recording

From Tuner

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select TUNER and to
access the desired radio band.
3. Tune to the station to be recorded.
4. Press RECORD to begin recording.
5. Press STOP to end recording.
9:32 AM Page 13
/ SKIP BACK-
.
on the remote control to
to disable continuous play.

From CD

1. Insert a tape into deck 1.
2. Press SOURCE repeatedly to select CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be recorded
and start playback.
5. Press RECORD to begin recording.
6. Press STOP to end recording.

Tape to Tape

Synchronize Recording
1. Press BAND/DECK 1/2 to select tape 2.
2. Insert the destination tape in deck 1.
3. Insert the source tape into deck 2.
4. Press RECORD. The playback and recording start
simultaneously.
Normal Recording
1. Press BAND/DECK 1/2 to select tape 2.
2. Insert the destination tape in deck 1.
3. Insert the source tape into deck 2 and press
PLAY to start playback .
4. Press RECORD when ready to record.

From an Auxiliary Input

1. Insert the cassette in deck 1.
2. Check that the auxiliary device has been connected
correctly to the AUX connector on the back of the
audio system.
3. Start playback on the auxiliary device.
4. Press RECORD to begin recording.
5.. Press STOP to end recording.
EN
9