Customizing A Page - Simrad IS40 Operator's Manual

14 |

Customizing a page

Once selected you can change the displayed data by editing the page.
Change data
You can edit a template page so it displays the specific information that you require.
¼ Note:
A template page cannot be edited until it has been selected as one of the eight data
pages.
To change the display data shown on a template page, first select the template from the
pages menu. In the action menu select Change Data. Highlight the desired field in the page
you wish to edit and press 'Enter'
¼ Note:
Use the directional keys on the display to navigate between the individual data fields.
Pressing the directional key in one direction will change the highlighted field in sequence and
in continuous rotation.
Once the data field has been selected you can chose the data type you wish to place in this
field from the menu.
Select the data type by pressing 'Enter' . Once selected, a tick will appear in the check box.
The required data will now appear in the selected field. To populate other blank fields, repeat
the process.
¼ Note:
If a data type is selected, but there is no sensor on the network providing the
information, there will be no data reading on the display. Instead there will be dashes.
¼ Note:
Press the page key at anytime to return to the template.
Operation | IS40 Operator Manual