Settings; Setting The Clock And Timer; Program Recording; Sleep Mode - RCA RS2100 User Manual

RS2100 EN (04_07_06)

Settings

Showing Demonstration
Press DEMO to turn on/off demonstration mode.
EN
Setting the Clock
1. Press and hold CLOCK on the remote control
until the hour flashes on the display.
2. Press or
press CLOCK to shift to minute digits.
3. Press or
4. Press CLOCK twice to save and quit settings.
Note:
When system is ON, you can press
CLOCK to display the current time for about
2 seconds.
Setting the Timer
You can turn on/off the unit or record TUNER at
preset times by setting the timer.
1. Press and hold TIMER on the remote control
until Timer On and the clock hour flashes on
the display.
2. Press or
3. Press TIMER. Repeat step 2 to change to Timer
Off setting with clock hour flashing. .
4. Press TIMER to select source. Press
to select CD/USB/Tuner/Rec Tuner.
If Rec Tuner is selected, press
select the preset station.
5. Press TIMER. Adjust VOLUME CONTROL to set
volume.
6. Press TIMER to save and quit setting. The timer
is automatically activated once timer
setting is saved.
Tips:
"Rec Tuner" setting is for Program
Recording. For more information, see
paragraph below.
7
7/7/06 11:29 AM Page 14
to set the hour and then
to set the minute.
to set the time.
or
or to
Activating the Timer
Press and release TIMER to turn on/off the alarm.
is displayed when timer is activated.

Program Recording

When setting the Timer, select "Rec Tuner" as the
source to preset the unit to record radio at the
preset time. Make sure the mp3 player is
connected and have enough memory space.

Sleep Mode

You can select the time interval before the unit
turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
SLEEP is displayed when sleep mode is activated.
Viewing Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Adjusting Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated
when the unit is turned off.