Basic Application; Standard Application - Honeywell NXS0003V35A2H1 Product Data

•
"ALL-IN-ONE" MULTIPURPOSE software
Flexible "ALL-IN-ONE" multipurpose software offers predefined applications as described below for different kind of
needs. This flexible package really makes it possible to answer any needs from the application with Honeywell NXS.

Basic application

- The most typical choice for HVAC - covers most of the applications
- Everything needed for basic speed control
- Includes only one small group of parameters with default values to create simple selection
Very simple commissioning
-
- The control signals of this application are fixed with default functions (not configurable)
- The Basic Application is set as the default when the drive leaves the factory.

Standard application

nd
- The 2 most typical choice for HVAC - extended version of the basic application
- For more demanding cases where more functionality is required
- The Standard Application has the same I/O-configuration and control logic as the Basic application
(i.e. no rewiring needed).
All inputs and all outputs are freely configurable
-
More functions, e.g. dynamic braking, DC braking, Prohibit Frequency for resonance elimination
-
Motor
Variable Frequency Drive
Fig. 8. Basic speed control – the typical use of basic and standard application
Speed Signal
V signal to AI1
mA signal to AI2
NXS VARIABLE FREQUENCY DRIVES
Pump
or
Fan
Control System
13
Load
Sensor
EN0B-0620GE51 R1107