Troubleshooting; Running The System Test - RCA pmn User Manual

Reference

Troubleshooting

The DSS ® System Test allows you to run a basic diagnostics check
®
on your DSS system. If you are experiencing any trouble with
your system, run the system test.
Make sure that
• All connections—jacks, cables, etc. are correctly in place. See
the section, Connecting Your DSS
information.
• There are batteries in the remote, and that they are working
correctly.
• The access card is installed in the receiver.

Running the System Test

Follow these steps to run the diagnostics system test on your
system.
1. Turn on your TV and the DSS
2. Press DSS to put remote in DSS
MENU•SELECT to bring up the Main menu.
3. Point to and select Options.
4. Point to and select System Options.
5. Point to and select System Test.
6. If your system does not pass the system test, check any of
these potential trouble areas: cabling, pointing the satellite
dish, phone connection, and access card.
7. If you continue to have problems, call 1-800-679-4776.
68
® Receiver, for more
® receiver.
® system mode, then press