Counter; Function Setting - Canon D1 Service Manual Digest

■ COUNTER

title
Inlet static charge eliminator A point in time of the consumption
degree confirmation / exchange
counter
of the inlet static charge
eliminator .
Delivery static charge A point in time of the consumption
degree confirmation / exchange
eliminator counter
delivery static charge
of the
eliminator.
Shift roller counter A point in time of the consumption
degree confirmation / exchange
of the shift roller.
Staple unit counter A point in time of the consumption
degree confirmation / exchange
of the staple unit.
Punch unit counter A point in time of the consumption
degree confirmation / exchange
of the punch unit.

■ FUNCTION SETTING

title Use case
Controller PCB RAM clear A point in time of the
initialization of the EEPROM.
Use case
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
1st line: Total counter value from the previous replacement.
2nd line: Estimated life.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
1st line: Total counter value from the previous replacement.
2nd line: Estimated life.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
To clear the counter value: Select the item, and then press
Clear key.
To change the estimated life: Select the item, enter the value,
and then press OK key.
To execute the RAM clear of Finisher Controller PCB to delete all the
adjustment contents and counter information.
Details Service mode
(LV1)
COPIER>COUNTER>DRBL-2
>ENT-STC
(LV1)
COPIER>COUNTER>DRBL-2
>DL-STC
(LV1)
COPIER>COUNTER>DRBL-2
>OFST-RL
(LV1)
COPIER>COUNTER>DRBL-2
>FIN-STPR
(LV1)
COPIER>COUNTER>DRBL-2
>PUNCH
Details
Adjustment range Unit
0 to 99999999 time
0 to 99999999 time
0 to 99999999 piece
0 to 99999999 time
0 to 99999999 time
Service mode Adjustment Unit
range
- - -
Default value
0
0
0
2
0
0
T-2-2
Default value
-
T-2-3
2-3