Back Panel Controls - RCA DRD202RA User Manual

Reference
IN
FROM
ANT
S-VIDEO VIDEO
CH 4
OUT
CH 3
TO
TV

Back Panel Controls

IN FROM ANT Use to connect an off-air antenna or cable TV signal
to the DSS system.
®
OUT TO TV Use to connect the DSS
your TV has audio/video jacks, you should use those jacks to get
better picture and sound quality.
CH3/CH4 SWITCH If a coaxial cable is used to connect the DSS
receiver to your TV, you must set the CH3/CH4 SWITCH. For example,
to see the DSS ® signal on TV channel 3, set the switch to 3.
S-VIDEO Provides the best picture quality. If your TV has S-VIDEO
capability, use this jack along with the audio/video jacks to connect
the DSS ® receiver to your TV.
VIDEO Provides better picture quality than the OUT TO TV jack. If
your TV has audio/video capability, use this jack to connect the DSS
receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV
jack. If your TV has audio/video capability, use these jacks to connect
®
the DSS receiver to your TV. You must also connect the VIDEO jack.
WIDE BAND DATA PORT This port allows you to connect the DSS
system to future services and accessories. A shielded cable and
additional hardware may be required.
LOW SPEED DATA PORT this port allows you to connect the DSS
system to accessories, such as the Home Control base module.
SATELLITE IN Use to connect the DSS
PHONE JACK Use to connect a phone line to the DSS
®
DSS system requires a phone line connection to periodically call out
to program providers.
VCR CONTROL Allows the receiver to control your VCR.
REMOTE IN Use in conjunction with a remote control signal sender.
VCR CONTROL
R AUDIO L WIDE BAND DATA
REMOTE IN
®
receiver to your TV. However, if
® receiver to the satellite dish.
LOW SPEED DATA
SATELLITE IN
®
®
®
®
®
receiver. The
PHONE JACK
59