Table of Contents
Advertisement
CHAPTER 8: INSTALLING THE 7500
Push gently but firmly on the board until it is firmly in place, and the edges of the board
rest on the notches in the housing.
Figure 28:
Top View with Second Asynchronous Interface Enhancement Board Installed
6 . Close the door by hooking the hinges under the front housing, then snapping the rear tabs in
place.
7 . From the package in which your enhancement board came, remove the label indicating EIA-
232D interface. Peel off the label and affix it to the rear panel underneath the Port 2 connector.
109
Advertisement
Table of Contents
