Configuring PAL output modules
Modifying
Deleting
The service that was selected is now visible in the Channel list tab.
The remaining slots on the output module can now be configured in the
same manner.
1. Press the Setup button for the output module to be modified.
2. Make the desired changes.
3. Press the Update button.
4. Press the Submit button.
5. Press the Apply button in the Configuration window
1. Press the Delete button of the output module to be removed.
A confirmation popup is displayed
2. Press Yes to remove the output module.
The output module is displayed in red in the Output tab.
3. Turn off the headend.
4. Physically remove the output module from the headend.
17