Page 1
Prepare your device for using the new navigation software: 1. Insert the ESD560 card to the SD slot of your MAP360/MAP560 2. Connect your device to a computer. Make sure that ActiveSync is up and running. 3. Insert the ESD560 CD (8cm) into the CD-ROM drive of the computer.
Page 2
6. Select Update. 7. After the update is completed, a message will appear. Click OK and your device automatically restarts.
Page 3
Use the new navigation software: After you have completed the above procedure, you can use the new navigation software with the ESD560 SD card inserted. Simply insert the ESD560 SD card before running the navigaiton software. As long as this card is inserted in your device, you are using the new navigation software and map you purchased.
Page 4
2. After successful installation, start the software on your PC a. Select your language b. Make sure, that your MAP360/MAP560 with ESD560 inserted is connected via Active sync to your PC. 3. Please select an option Installation of “Fixed speed cameras” is free of charge for the first time.
Page 5
Please restart your Navigation software to apply the changes. If you need more in-depth information about the navigation software, read the user manual supplied on the disc.