Table of Contents
Advertisement
10
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise the image:
1
Press the elevator foot release. (Illustration #1)
2
Raise the image to the desired height angle (Illustration #2), then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
To lower the image:
1
Press the elevator foot release. (Illustration #1)
2
Lower the image to the desired height angle (Illustration #2) , then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
3
Tilt adjusting wheel
1
Elevator foot
release button
2
Elevator foot
3
Tilt adjusting wheel
Advertisement
Table of Contents
