Advertisement
Bluetooth
wireless technology
®
SPEAKER OPERATION
To connect to the Broan-NuTone Bluetooth® wireless technology Speaker for the rst time:
1.
To play your personal music or audio files, you need a Bluetooth wireless technology enabled
Smart Phone, Tablet, or any other such
2.
Set your device to a low-to-midrange volume before connecting to the speaker.
3.
Make sure Fan is ON and Bluetooth
meters (approximately 33 feet) of the Speaker/Fan.
4.
Pairing your
Bluetooth
wireless technology enabled device with the Speaker:
®
a.
For iPad/iPhone/iPod touch:
i.
From your iPad/iPhone/iPod touch home page, tap Settings.
ii.
From Settings, tap General (if you have iOS 7 or greater, you can skip this
step).
iii.
From General, tap Bluetooth.
iv.
Move the
Bluetooth
®
this, a list of discoverable
v.
The Broan-NuTone Speaker has the
Fan". This identifier should be in the list of Discoverable Devices. If not,
turn the Fan OFF, then ON, then turn
•
If "Sensonic™ Vent Fan" is still not on the list, consult with the owner's
manual for your device and follow the procedure for Pairing/Connecting
a
Bluetooth
wireless technology device.
®
vi.
Tap on "Sensonic™ Vent Fan" to complete the pairing of the
less technology Speaker with your Apple device.
b.
For Android Phone/Tablet:
i.
From your smart phone/tablet home page, tap Settings.
ii.
From the Settings menu, go to Wireless & Controls, Wireless & Networks, or
something similar.
iii.
Find Bluetooth
, Bluetooth
®
or move Bluetooth
®
iv.
On the
Bluetooth
screen, tap "Scan for Devices", "Search for Devices" or
®
something similar.
v.
The Broan-NuTone Speaker has the
Fan". This identifier should show up in the list of Available Devices. If not,
turn Fan OFF, then ON, and repeat pairing procedure.
•
If "Sensonic™ Vent Fan" is still not on the list, consult with the owner's
manual for your Android device and follow the procedure for
Pairing/Connecting a
vi.
Tap on "Sensonic™ Vent Fan" to complete the pairing of the
less technology Speaker with your Android device.
c.
For all other
Bluetooth
wireless technology enabled devices:
®
i.
Follow the instructions that came with your
enabled Phone, Tablet or Pad device to set it to search for
technology accessories.
ii.
Most
Bluetooth
wireless technology enabled devices will require you to go to
®
the "Paired Devices" (or similar) screen and SELECT "Search for Devices" or
something similar.
iii.
The Broan-NuTone Speaker has the
Fan". This identifier should show up in the list of Available Devices, Discov-
erable Devices or similar. If not, turn Fan OFF, then ON, and repeat pairing
procedure.
5.
Open up the audio program on your device and play your music or other audio files. The audio
file should play over the Bluetooth
®
6.
When done playing/listening to your audio files, disconnect from the Speaker by either turning
OFF the fan, disconnecting Bluetooth
Tablet, etc) or simply walking away. The Bluetooth
disconnect when the device is out of range of the Speaker, which should occur when device is
approximately 10 meters (33 feet) away from the Speaker.
To connect to the Bluetooth
wireless technology Speaker each subsequent time
®
(after initial connection is made):
The Sensonic™ Speaker can only play audio files from one Bluetooth
1.
vice at a time, therefore one device must be DISCONNECTED (but not necessarily UNPAIRED)
before using the Speaker with another device.
If your Bluetooth
wireless technology device was DISCONNECTED but not UNPAIRED from
2.
®
the Speaker last time it was used, then it should automatically connect next time the device
is within range of the Speaker, unless the Speaker is already CONNECTED to another device.
a.
If your device does not CONNECT automatically with the Speaker, then find your
"Paired Devices" or similar list and TAP on "Sensonic Vent Fan" to reconnect with
the Sensonic™ Speaker.
If your Bluetooth
wireless technology device was UNPAIRED from the Speaker after the last
3.
®
time it was used, you must follow the connection procedure in the previous section for PAIR-
ING your device with the Speaker.
4.
Open up the audio program on your device and play your music or other audio files. The audio
file should play over the Bluetooth
®
When done playing/listening to your audio files, disconnect from the Speaker by either turning
5.
OFF the fan, disconnecting Bluetooth
Tablet, etc) or simply walking away. The Bluetooth
disconnect when the device is out of range of the Speaker, which should occur when device is
approximately 10 meters (33 feet) away from the Speaker.
device.
wireless technology enabled device is located within 10
®
Slider to ON/green (if it isn't ON already). When you do
Bluetooth
wireless technology devices will appear.
®
Bluetooth
identifier "Sensonic™ Vent
®
Bluetooth
OFF, then ON.
®
Bluetooth
Settings or something similar and tap Bluetooth
®
Slider to ON (if it isn't on already).
Bluetooth
identifier "Sensonic™ Vent
®
Bluetooth
device.
®
Bluetooth
Bluetooth
wireless technology
®
Bluetooth
Bluetooth
identifier "Sensonic™ Vent
®
Fan Speakers.
wireless technology from your device (Smart Phone,
®
wireless technology will automatically
®
wireless technology de-
®
wireless technology Fan Speakers.
wireless technology from your device (Smart Phone,
®
wireless technology will automatically
®
View other RV hardware made by NuTone on our website.
wire-
®
®
wire-
®
wireless
®
MODEL SPKACC
Page 4
Advertisement
