Table of Contents
Advertisement
Configuring the server
5.3.2
Configuring the onboard SATA controller
A SATA controller is integrated on the system board. You can configure the
onboard SATA controller either before or during ServerStart. Using ServerStart
is recommended.
I
The controller has its own configuration utility. More detailed information
may be found in the "Embedded MegaRAID Software User's Guide"
manual (on the ServerBooks DVD under "Controllers").
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
5.3.3
Configuring the onboard SAS controller with
"Integrated Mirroring Enhanced"
The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality. Optionally, you can configure the onboard SAS controller before or
during ServerStart. Using ServerStart is recommended.
I
The controller makes a separate utility available for IME configuration.
For further information, refer to the "SAS/SATA Controller MegaRAID
1064 / 1068 / 1078 Installation Guide" on the ServerBooks DVD (select
"Controllers" from the menu).
I
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.
68
Operating manual
Starting up and operation
RX100 S5
Advertisement
Table of Contents
