Connecting To Computer; Charging The Battery; Transferring Files To The Player - RCA M2500 User Manual

Connecting to Computer

EN

Charging the Battery

The player's battery can only be charged
through the USB port of a computer.
1. Connect the player to your computer
with the USB connection cable
provided. Connect it to the player first
before the computer. The larger end
of the cable should be connected to
the computer while the smaller end to
the player.
Once connected, the display shows as
below:
Hold
2. Press and hold
charging mode. The display shows as
below with the battery icon
animating.
• Charge the unit for at least 2 hours
before first use.
• You can still transfer files to the player
in the battery charging mode.
• When the battery is full, the display
shows "Battery full".
5
USB Connected
to charge batt.
to enter battery
USB Connected
Transferring Files to the
Player
You should refer to the software manual
for details in software installation,
connecting your player with the
computer and transferring files to the
player.
Attention
Do not disconnect the USB
connection during music
download. Doing so may corrupt system
files or the files being downloaded.
Note
Refer to the software
instruction manual for
procedures in installing music
management software and transferring
files to the player.