Pioneer BDP-51FD Service Manual page 33

5
[5] ATA/ATAPI DEBUG OSD
Press the ESC, DISP, then 3 keys, in that order, to display the 1st screen for ATA/ATAPI DEBUG OSD.
Then press the DIG/ANA key to switch screens.
• 3rd screen (ATA/ATAPI DEBUG OSD-Drive maintenance data)
1
2
3
4
5
The power-on duration and error logs that the writer manages are displayed.
• 4th screen (ATA/ATAPI DEBUG OSD-Judgment of degradation of LDs)
It is indicated to what extent the LDs (for BD, DVD, and CD) of the drive have degraded. To update the on-screen data,
content and updating conditions, see Table 1 below:
Table 1: Display content and updating conditions
Display Item
BD
DVD
CD
TMP
[6] Indications for the Results of Self-Diagnosis
Self-diagnosis is performed upon startup of the product, and the results are displayed as shown below.
• Specifications of indications for the results of self-diagnosis
1
2
3
4
5
1 SKY Chip Info: Version and revision Nos. of the SKY Chip
2 HDMI Transmitter: Result of checking communications with the SII9134CTU
3 SUBCON: Result of checking communications with the LC87F5932A
4 PLL Synthesizer: Result of checking communications with the CDCE906
5 DRIVE: Result of checking communications with the BD drive
5
6
1 Accumulated power-on duration
2 LD read power-on duration for the BD
3 LD read power-on duration for the DVD.
4 LD read power-on duration for the CD.
5 Serial No. of the PU
Display Content
Judgment of degradation of the LD for BD.
NG with a rate of 120% or higher
Judgment of degradation of the LD for DVD.
NG with a rate of 120% or higher
Judgment of degradation of the LD for CD.
NG with a rate of 120% or higher
Current temperature inside the writer
BDP-51FD
6
7
7
8
A
B
C
D
E
F
33
8