Screw-Down Crown; Water Resistance - Bulova Accu-Swiss series Instruction

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

SCREW-DOWN CROWN

If your watch includes a screw-down crown, you have additional assurance that it will remain
watertight. To make the crown operational, it must be turned toward you until the threads are
disengaged. Then, instructions for setting must be followed. To reseal the crown, press in until
threads engage. Turn away from you until tight.
DEEP WATER LIMITED WARRANTY
Supplementary and subject to all the provisions and duration of the basic Bulova watch
limited warranty, deep sea watches are further warranted not to leak when submerged in water
to the depth shown on the dial, provided crystal and crown remain intact and the case has
been unopened. In order to assure the preservation of your watch's water resistance, particular-
ly in those instances where the element of safety is involved, have it checked occasionally by a
competent watch technician and serviced or repaired, if necessary.
In addition, the wearer should avoid manipulation of the crown when submerged.

WATER RESISTANCE

Watch models marked only "Water Resistant" on the case back, without additional depth mark-
ings are not to be used for swimming. For swimming, models that have the additional marking
of "50m," "100m" or "200m" are recommended.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents