Before You Begin - Cisco SG350XG-2F10 Quick Start Manual

Welcome
Thank you for choosing the Cisco 350XG Series 10G Stackable Managed
Switch, a Cisco network communications device. This device is designed
to be operational right out-of-the-box as a standard layer 2 and 3 switch. In
the default configuration, it will forward packets between connecting
devices after power up.
This guide familiarizes you with the layout of the switch and describes how
to deploy the switch in your network. For additional information, see
www.cisco.com/go/350switches.
Package Contents
• Cisco 350XG 10G Stackable Managed Switch
• Power Cord
• Rack-Mount Kit and Rubber Feet
• DB-9 to RJ45 Serial Cable
• This Quick Start Guide
• Pointer Cardwith China RoHS
• Technical Support Contacts
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)

Before You Begin

1
Before you begin the installation, make sure that you have the following:
• RJ-45 Ethernet cables (Category 6A or higher) for connecting network
devices.
• Console cable for using the console port to manage your switch.
• Tools for installing the hardware. The rack-mount kit packed with the
switch contains four rubber feet for desktop placement, and two
brackets and twelve screws for rack-mounting.
• PC with Internet Explorer (version 8.0, 9.0, 10.0, or higher) or Firefox
(version 16.0, 17.0, or higher) for using the web-based interface or the
console port to manage your switch.
2 Cisco 350XG Series 1OG Stackable Switches Quick Start Guide