Using Your Tv; To Watch A Tv Program; To Set The Clock - RCA 253 Series User Manual

Using Your TV

To Watch a TV Program

1. Press TV on the remote to turn on the TV and audio/video receiver and set the remote
to operate the TV.
2. Press CHANNEL up or down on the remote to scan up or down for an active channel or
press two number buttons to go directly to a channel. To tune channels 100 and above,
press and hold the number 1 button on the remote until 1– – is displayed on the
screen. Then enter the other two numbers.
3. Press POWER twice on the remote to turn off the TV and audio/video receiver.

To Set the Clock

1. Repeatedly press TV MENU on the remote to highlight Setup Menu. Press the + or –
button to display the setup functions. Repeatedly press TV MENU to highlight
Clock Set.
Mute
Video Menu
Audio Menu
Setup Menu
2. Press and hold the – button on the remote to select the correct hour (including AM or
PM). Press and hold the + button on the remote to select the correct minute(s).
The correct time will now appear on the screen whenever you change channels or
press TV on the remote.
4
8:27 13
Cable/Air: Air
VCR1 Chan: 91
VCR2 Chan: 92
Cable Chan: 90
Clock Set: -Hr+Min