Setting The Power Saver For Computer Images; The Power/Standby Indicator - RCA Scenium PHD50400 User Manual

FUNCTION
DISPLAY : ON
MENU ADJUST : 1
POWER SAVER : ON
GRAY LEVEL : 3
FILM MODE : ON
RGB3 ADJ. : 1
SCREEN SAVER
RESET
ADJ.
SEL.
This is the FUNCTION menu with the POWER SAVER
option highlighted.
POWER/STANDBY indicator
POWER POWER/
SAVER STANDBY
Mode indicator
On Green
Standby Yellow
Suspend Red
Off Red
Chapter 2

Setting the POWER SAVER for Computer Images

The POWER SAVER function can be used when the signal source to the monitor
comes from a computer conforming to the VESA DPMS format. This function
automatically reduces the monitor's power consumption if no operation is
performed for a certain amount of time. POWER SAVER can be turned on or off.
If the computer's power isn't turned on or if the computer and selector tuner
are not properly connected, POWER SAVER is set to OFF.
For instructions on using the computer's power management function, see your
computer's operating manual.
To turn the monitor's POWER SAVER function on or off:
RETURN
1. From the main menu, highlight and select FUNCTION. The FUNCTION menu
is displayed.
2. Highlight the POWER SAVER option.
3. Use the
4. You can continue making adjustments in the FUNCTION menu, return to the
previous menu by pressing the GO BACK button or press CLEAR to exit the
menu system.
The POWER/STANDBY indicator shows the status of the POWER SAVER function.
See below for status and description.
Power Saver
Operating
Status
Description
Horizontal and vertical
Not activated
synchronizing signals are present
from the computer.
No horizontal synchronizing
Activated
signals are present from the
computer.
No vertical synchronizing signals
Activated
are present from the computer.
No horizontal and vertical
synchronizing signals are present
Activated
from the computer.
button to toggle the setting ON or OFF.
Turning the Picture Back On
The Menu System
Picture already on.
Use the keyboard or mouse. The
picture reappears immediately.
Use the keyboard or mouse. The
picture reappears, but more slowly
than when in standby mode.
Use the keyboard or mouse. The
picture reappears, but more slowly
than when in either standby or
suspend mode.
27