Table of Contents
Advertisement
Call functions
•
Drop:
disconnect the call currently on hold or
the active call.
•
End call: end all calls.
Using the video call feature
In a 3G (UMTS) service area, your phone can make
or receive a video call, allowing you to see other
person on the screen during a conversation. The
other person's phone must support the video call
feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [
]. The other person appears on the
screen when he/she allows.
Answering a video call
When you receive a video call, answer as you would
when receiving a voice call. Press <Show me> to
allow the caller to see you.
Using video call options
During a video call, press <Options> to access the
following options:
•
Loudspeaker/Loudspeaker off: turn the
speakerphone feature or switch back to Normal
mode.
28
•
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or hands-free car
kit or back to the phone. To use this feature, you
first need to connect your headset to the phone.
p. 71
•
Mute camera: turn off the camera.
•
Mute voice: turn off the microphone.
•
Mute camera & voice: turn off the camera and
the microphone.
•
Mute key tone: turn off the key tones.
•
Zoom: display or hide the zoom control bar.
•
Brightness/Hide brightness: display or hide
the brightness control bar.
•
Effects: change the colour tone of the image.
•
Hide information/Show information: hide or
display information about the video call.
•
Send DTMF: send Dual tone multi-frequency
(DTMF) tones as a group after entering the entire
number you need to send or retrieving a number
from Contacts.
•
Video quality: change the image quality of the
camera.
•
End call: end the video call.
Advertisement
Table of Contents
