Download Print this page

Westinghouse DB-50 User Manual page 21

Hide thumbs Also See for DB-50:

Note: For RMS/R 500 Basic Retrofit Kits, the External Harness is the plug pictured

below. It is to be plugged into the right side of the Trip Unit.

--,

)

Step 12:

The Cell Harness is to be mounted in the Breaker Cell. The plug end is to be

mounted on the right front side of the Cell. The Terminal Blocks can be mounted

next to the plug. With the Breaker in the Cell and the External Harness connected

the Breaker should be free to go from disconnect to the connect position, and all

Retrofit wiring should be out of the way.

Step 13:

The Retrofit is now complete and ready to be tested. See the Retrofit Application

Data for test procedures.