Yamaha PSR-E363 Owner's Manual page 20

Playing a Variety of Instrument Voices
How to play the various Types
The method of sounding the Harmony effect (01–26)
differs depending on the selected type. For Types 01–
05, turn the Auto Accompaniment on and play it by
pressing a chord in the auto accompaniment section of
the keyboard, then play some keys in the right-hand
side to produce the Harmony effect. For Types 06–26,
turning auto accompaniment on or off has no effect.
However, it is necessary to play two notes simultane-
ously for Types 06–12.
• Harmony Type 001 to 005
Press the right-hand keys while playing chords in the
auto accompaniment range of the keyboard when
Auto Accompaniment is on (page 22).
• Harmony Type 006 to 012 (Trill)
• Harmony Type 013 to 019 (Tremolo)
• Harmony Type 020 to 026 (Echo)
• Arpeggio Type 027 to 176
When Split is off:
Arpeggio function applies to the Main Voice
and the Dual Voice.
When Split is on:
Arpeggio function applies only to the split
Voice.
NOTE
• Arpeggio cannot be applied to the Split and Main/
Dual Voices simultaneously.
• Selecting a Voice number between 226 and 235 as
the Main Voice will turn on Arpeggio and Split auto-
matically.
20
PSR-E363, PSR-EW300, YPT-360 Owner's Manual
Hold down two keys.
Keep holding
down the keys.
Play the keys.
To adjust the Harmony Volume:
This can be adjusted via Function number 029 (page
46).
To adjust the Arpeggio Velocity:
This can be adjusted via Function number 030 (page
46).
Holding the Arpeggio Playback via the
Footswitch (Hold)
You can set the instrument so that Arpeggio play-
back continues even after the note has been
released, by pressing the footswitch connected to the
[SUSTAIN] jack.
1
Press a [FUNCTION] button a number of
times until the "Pdl Func" (Function 031)
item appears on the display.
After "Pdl Func" is shown for a few seconds, the
current setting is shown.
Pdl Func
031
Sustain
1
031
2
Use the number buttons [1]–[3], [+], [-]
buttons to select "Arp Hold."
If you want to restore the footswitch function to
sustain, select "Sustain." If you want to use both
hold and sustain functions, select "Hold+Sus."
Arp Hold
2
031
3
Try playing the keyboard with Arpeggio
playback using the footswitch.
Press the notes to trigger the Arpeggio, then
press the footswitch. Even if you release the
notes, Arpeggio playback will continue. To stop
Arpeggio playback, release the footswitch.