Mount And Wire Thermostat - Honeywell Prestige THX9000 System Installation Manual

Mount and wire thermostat

1
Pull wiring through hole in wall plate and install as shown below.
Drywall: 3/16" hole
Plaster: 7/32" hole
Wiring
Strip 1/4" insulation and connect wires to screw terminals as shown below (see
wiring guides on following pages).
Factory-installed jumper
Wiring must comply with local electrical codes.
Wall anchor
3
Mounting screw
System wiring
69-2057EFS—03
MCR29241
MCR29241
MCR29793