Set The Time; The Clonepro; Understanding The Menus; Master Menus - RCA J26L637 User Manual

Connections and Setup

Set the Time

The current time options might not be available to the basic user, depending on how they've been set by the master user.
(The Time Confi guration menu isn't available in the basic menu).
To set the time, from the Main menu select Time then Time Confi g. If the current time has not been set, use the arrow and
number buttons on the remote control to make changes.
1. From the Main menu, highlight Time and press OK.
2. Time Confi g. is highlighted. Press the right arrow to enter the menu.
3. Time is highlighted. To set the time press the right and left arrow button to add or subtract minutes. Use the number
buttons to set the hour. The OK button changes am and pm.
8

The ClonePRO™

If several TVs need to be programmed with the same menu settings, an
optional ClonePRO remote can be used to copy all of the menu settings
from one TV into other TVs to reduce installation time. Information can
be both downloaded to and uploaded from the ClonePRO using the
DSCI port on the TV's back panel or using the IR sensor. A ClonePRO
can be obtained from your RCA commercial distributor. Chapter 2 has
information about this remote, see
menu options before using the ClonePRO, continue on in this chapter.
You can use the ClonePRO at any time.

Understanding the Menus

This television displays two levels of menus: master and basic.

Master Menus

The master menus are accessible by pressing MENU on the master
remote (R130K2). This menu shows all menu options. The person
who chooses the settings available to the basic end user is called the
"master user."

Basic Menus

The basic menus are accessible by pressing MENU on a basic remote
(R130K1 or other remote) or the front panel. The choices available on
the basic menus and control panels will vary depending on limits set
by the master user and the input selected. You can turn off the basic
menu completely through the Access & Power Options menu. For more
information on the effects of master user choices on the basic menu and
basic user functionality, continue on in this chapter.
Note: Options set in the master menu are stored in nonvolatile
memory. If any options are changed in the basic menu, and then
the TV is turned off, the TV defaults to the master menu settings
once it's turned back on.
page 15. If you want to set other
Chapter 1