Epson EB-2247U User Manual page 145

Projector Setup Settings - ECO Menu
Setting Options
Port
Standby Mode ** Communication
On
Communication
Off
ECO Display On
Off
Reset —
* Available only for
EB‑2247U/EB‑2142W/EB‑2042/EB‑990U/EB‑980W/EB‑970/EB‑109W/EB‑108/
EB‑107/EB‑W39/EB‑X39.
** Available only for EB‑S39.
• When the Sleep Mode Timer setting is enabled, the lamp dims for a
short time before the timer limit is reached and the projector turns
off.
a
• When the Lens Cover Timer or A/V Mute Timer settings are
enabled, the lamp uses less power when the lens cover is closed or
A/V Mute is activated.
Description
Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Communication On is automatically
selected when A/V Output is set to
Always On.
s Extended > A/V Settings > A/V
Output
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the lamp
brightness changes (when On).
Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
g g Related Links
• "Projector Setup Settings - Extended Menu"
145
p.131