Selecting The Connection Destination - Canon EOS M2 Basic Instruction Manual

Selecting the Connection Destination

Register the target camera to connect to via a wireless LAN. The camera can
be connected to only one camera at a time.
14
1
Select [Wi-Fi function].

Under the [52] tab, set [Wi-Fi] to
[Enable], then select [Wi-Fi function].
2
Select [z].

Press the <S> keys to select [z]
(Transfer imgs between cameras), then
press <0>.

The camera's <k> lamp will blink.
3
Start the connection on the target
camera.

When the screen on the left is displayed
on the camera, start the connection on
the target camera as well. For the
operation procedure, refer to the
instruction manual of the target camera.

When a connection is established, the
settings are automatically saved and an
image on the card is displayed.

The camera's <k> lamp will light up in
blue.