Chapter 2: Using The Remote Control; The Buttons On The Remote Control - RCA F27550 User Manual

Chapter 2: Using the Remote Control

L.E.D.
ON OFF
VCR TV
DVD VPORT AUX SAT CABLE
MUTE SKIP
SOUND
GO BACK
GUIDE INFO
OK
MENU CLEAR
1 2 3
4 5 6
7 8 9
WHO•INPUT ANTENNA
0
REVERSE PLAY FORWARD
RECORD STOP PAUSE
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature (Chapter 3), pressing the DVD
button automatically tunes the TV to the correct channel.
FORWARD If you're operating a VCR or DVD player with the remote control, press FORWARD to advance a
videotape or disc.
GO BACK Returns you to the previous channel.
GUIDE If you're operating another component that has a guide, this button access the on-screen guide.
INFO Displays channel information.
L.E.D. (light-emitting diode) The little light on the remote that lights when you are programming the
remote. It also lights when you press a valid button on the remote.
MENU Displays the TV's Main menu.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that is highlighted.
ON•OFF Turns the TV on and off. When the remote is in another mode (VCR, DVD, Satellite, etc.) and the
remote is programmed to operate that component, you can press ON•OFF to turn the component on and
off.
PAUSE If you're operating a VCR or DVD player with the remote control, press PAUSE when the videotape
or disc is playing to pause playback.
PLAY If you're operating a VCR or DVD player, plays the videotape or disc.
RECORD If the remote is in VCR mode, press REC•VCR+ to start recording.
REVERSE If you're operating a VCR or DVD player, press REVERSE to go backwards on a videotape or disc.
SAT•CABLE Puts the remote in SAT•CABLE mode. If you set up the Auto Tuning feature (Chapter 3),
pressing the SAT•CABLE button automatically tunes the TV to the correct channel.
Chapter 2
Illustrations contained in this document are for representation only.

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly
through the remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit
channel, press and hold the first digit for two seconds until two dashes appear
to the right of the number, then add the second two. Example: to tune to
channel 123, press and hold 1 for two seconds, press 2, then press 3.
Arrow buttons (up, down, left, right) Move through the on-screen menu
system.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in
SAT•CABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component
you've programmed the remote to operate with this button. You can program
this button to control a cable box, audio components, a VCR, DVD player or
satellite receiver. If you set up the Auto Tuning feature (Chapter 3), pressing the
AUX button automatically tunes the TV to the correct channel.
CH (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue
changing channels.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
7