An acoustic signal sounds after the time
ends. The appliance deactivates.
2. Push a button to stop the acoustic
signal.
3. Clean the bottom of the appliance
with a damp soft sponge.
To stop Catalysis before it finishes, turn
the knob for the oven functions to the off
position.
10.5 Cleaning reminder
As a reminder that catalytic cleaning is
necessary, CATA flashes in the display
for 10 seconds after each activation and
deactivation of the appliance.
The cleaning reminder
goes out:
• after the end of the
Catalysis function.
• if you press
the same time.
10.6 Cleaning the oven door
The oven door has three glass
panels.You can remove the oven door
and the internal glass panels to clean
them.
The oven door can close if
you try to remove the glass
panels before you remove
the oven door.
CAUTION!
Do not use the appliance
without the glass panels.
1. Open the door fully and hold the two
door hinges.
2. Lift and turn the levers on the two
and
at
3. Close the oven door halfway to the
4. Put the door on a soft cloth on a
hinges.
first opening position. Then pull
forward and remove the door from its
seat.
stable surface.
ENGLISH
21