Table of Contents
Advertisement
Chapter 4: Playing Discs (DVDs)
36
Using the Repeat Feature
By default, the Repeat feature is Off. There are three Repeat options:
•
Title – repeats the title that is playing
•
Disc – repeats the chapter that is playing
•
A-B – repeats a segment of the disc that you select.
Repeating Titles, Chapters, or Tracks
1. While a disc is playing, press INFO (the Info Display appears).
2. Press the right arrow button until the Repeat icon is highlighted.
3. Press the up or down arrow button to scroll through the different Repeat options — Repeat title, Repeat disc,
Repeat AB, and Repeat Standard (the modes appear at the bottom of the Info Display).
4. To turn off the Repeat feature, press the up or down arrow button repeatedly until Repeat Mode: Standard
appears.
AB Repeat
AB Repeat lets you define a specific segment on the disc that you want to repeat. For example, you might want to
watch a specific scene from a movie repeatedly:
1. Follow steps 1 and 2 above.
2. Press the up (or down) arrow button until Repeat Mode: AB. Press OK to set A point appears at the bottom of
the Info Display. Press OK when the disc gets to the beginning point of the segment (the A point) that you
want to repeat.
3. Allow the disc to play to the end of the segment you want to repeat. Don't fast forward — you must let the
disc play in standard playback mode to set the B point (the ending point of the segment). Press OK to set the B
point (the segment you marked will play repeatedly until you turn off the Repeat feature).
4. To turn off the Repeat feature, highlight the Repeat icon, and press the up arrow button on the remote until
Repeat Mode: Standard appears at the bottom of the Info Display.
Note: Repeat is also cancelled when you eject the disc from the Digital Media Recorder.
Changing the Audio Language
If the disc was created with different language tracks (recorded in different languages), you can change the
language while you're playing the disc.
1. While a disc is playing, press INFO (the info display appears).
2. Press the right arrow button until the Audio icon is highlighted.
3. Press the down arrow button on the remote to scroll through the available audio languages.
4. When the language you want to use is highlighted, press the OK button (the dialog plays in the language you
selected).
Notes:
The language feature only works if the disc was created with multiple language tracks. If the disc doesn't contain
the language you selected, the disc will play in the default language.
When you choose an audio language during disc playback, you only override the audio language setting in the
Digital Media Recorder's Language menu temporarily.
Advertisement
Table of Contents
