13-10.Simple Remote Controller (Uty-Rsry And Uty-Rhry: Optional Parts); Status Icons - Fujitsu AUYG07LVLA Design & Technical Manual

13-10. Simple remote controller (UTY-RSRY and UTY-RHRY:
Optional parts)
¢ Overview
g
f
e
Display panel
m
l
1
* : Available only for UTY-RSR*.
2
* : Not available for a heat pump model unless it is set up
as an administrative indoor unit.
3
* : Not available for a heat pump model.
4
* : Not available for a cooling-only model.
5
* : Set the function setting of the indoor unit accordingly.
6
* : During address display mode.
a
b
c
d
h
i
j
k
a LED lamp
Lights during operation.
b Louver button
Adjusts the airflow direction.
c START/STOP button
Starts and stops operation.
d FAN control button
Each time the button is pressed, fan speed switches as
follows:
Auto High
e Room temperature sensor (inside)
Senses ambient temperature of unit.
f Set temperature button
Selects the setting temperature. (18—30 °C [COOL], 10
—30 °C [HEAT])
g Operation mode button*
Each time the button is pressed, operation mode switch-
es as follows:
*
Auto 2
Cool
h Operating mode indicator
i Airflow direction indicator
j FAN speed indicator
k Remote controller address indicator
l Status icons
Mode mismatch
5
Filter sign *
Defrost operation
Oil recovery operation
Under maintenance
Error
Special state
Conducting electricity
Emergency stop
Operation controlled
Forced stop
Remote controller sensor is enabled *
Central controlled
Setting temperature range is enabled
Operation prohibited
m Set temperature
Indicates indoor unit address. *
- 195 -
Med Low Quiet
1
* *
Dry Fan 3 Heat 4
5
6