Download Print this page

Planet ELA-100 Quick Installation Manual

Ethernet lightning arrest box

Advertisement

Quick Links

Quick Installation Guide for Ethernet Lightning Arrest Box
Thank you for purchasing PLANET Ethernet Lightning Arrest Box ELA-100, the Eth-
ernet Lightning Arrest Box package shall contain following contents:
Check the contents of your package for following parts:
Ethernet Lightning Arrest Box x1
Quick Installation Guide x1
Ground cable x1
If any of these pieces are missing or damaged, please contact your dealer imme-
diately, if possible, retain the carton including the original packing material, and
use them against to repack the product in case there is a need to return it to us
for repair.
Please refer to following procedure and picture to install the Ethernet Lightning
Arrest Box between two Ethernet devices.
Step 1:
In the right side, please use ground cable from package to connect the screw
and ground.
Step 2:
Please connect first Ethernet device to the protected port that near the screw
through the UTP cable.
Step 3:
Please connect second Ethernet device to un-protected port from other
side of Ethernet Lightning Arrest Box.


Advertisement

loading

Summary of Contents for Planet ELA-100

  • Page 1 Quick Installation Guide for Ethernet Lightning Arrest Box Thank you for purchasing PLANET Ethernet Lightning Arrest Box ELA-100, the Eth- ernet Lightning Arrest Box package shall contain following contents: Check the contents of your package for following parts: Ethernet Lightning Arrest Box x1...
  • Page 2 Quick Installation Guide for Ethernet Lightning Arrest Box Figure : ELA-00 Application Notice: 1. Please install this device at outdoor with shelter. 2. This Ethernet Lightning Arrest Box must be earthed. If not. this device may with electric shock and cause damage.
  • Page 3 Quick Installation Guide for Ethernet Lightning Arrest Box Specification Model ELA-100 Ethernet Interface 2 passive 10/100/1000 Ethernet Ports Ground 1 ground position DC spark-over voltage 230V, ±20% Nominal impulse discharge 20KA current ( wave 8/20μs) Arc Voltage at 1A ~35V...
  • Page 4 Quick Installation Guide for Ethernet Lightning Arrest Box 2010-AH0050-000...