Parental Controls And V-Chip - RCA Thomson User Manual

4. Choose which channel you want to set:
Set VCR1 Lets you set up the channel the TV tunes to when you press the VCR
button.
Set VCR2 Not available with your remote control.
Set SAT/CABLE Not available with your remote control.
Set DVD Lets you set up the channel the TV tunes to when you press the DVD
button.
5. Press the right arrow button to select the choice that matches the way you
have the component connected to this TV.
The choices and a brief explanation follow:
AUTO TUNING
Go Back
Set VCR1 VID1 . . .
Set VCR2 VID1 . . .
CH02 . . .
Set SAT/CABLE
CH03 . . .
Set DVD

Parental Controls and V-Chip

The choices in the USA V-CHIP menu involve software inside your TV (referred to as
V-Chip) which allows you to block TV programs and movies based on violence, sex,
or other content you may believe children should not view.
Once you block programs, you can unblock programs by entering a password.
By default, the software inside your TV is turned "off." For instructions to turn on
V-Chip, go to page 21.
Chapter 3
Graphics contained within this publication are for representation only.
Using the TV's Features
N/A Choose this if you don't have this particular component
connected to the TV, or if you don't want the TV to
automatically tune to the correct channel when you're using
this component.
CH02 (SAT/CABLE only- Not available with your remote
control).
CH03 or 04 Component is connected to the TV ANT jack on
the back of the TV, and you want the TV to tune to channel 3
or 4 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 3/4
switch is set to the appropriate channel.
VID1 Component is connected to the VIDEO 1 VIDEO or
S-VIDEO IN jack on the back of the TV and you want the TV
to tune to a video input channel when you press the
corresponding button.
VID2 Component is connected to the VIDEO 2 VIDEO or
Y, Pb, Pr jacks on the back of the TV and you want the TV to
tune to a video or component video input channel when you
press the corresponding button.
FRNT (Front Video Input) Component is connected to the
VIDEO jack on the front of the TV and you want the TV to
tune to the front video input channel when you press the
corresponding button.
15