Step 4: Plug In The Tv; Step 5: Place Batteries In The Remote; Step 6: Turn On The Tv; On-Screen Program Guide - RCA G27669 User Manual

Setup and Connections

Step 4: Plug in the TV

Plug the end into the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.
Step 5: Place Batteries in the
Remote
• Remove the battery compartment cover from the back of the
remote.
• Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
• Replace the cover.

Step 6: Turn On the TV

Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.

On-Screen Program Guide

The TV is designed to bring up the GUIDE Plus+ Gold on-screen program
guide when you use the TV button on the remote to turn on the TV
(after you have set up the GUIDE Plus+ Gold system). For more
information on setting up the GUIDE Plus+ Gold system, see the next
section, Interactive Setup.
To get out of the GUIDE Plus+ Gold System:
• Press OK to exit the GUIDE Plus+ Gold system and tune to the
highlighted channel.
• Press GUIDE to exit the GUIDE Plus+ Gold system and tune to the
channel displayed in the View window.
• Press CLEAR to exit the GUIDE Plus+ Gold system and go to the last
channel you were watching.

Step 7: Program the TV

Proceed to the next section, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
10
ON OFF
VCR1 TV
TV
DVD VCR2 AUX SAT CABLE
MUTE SKIP
SOUND GO BACK
GUIDE INFO