Introduction; Key Features Overview; On-Screen Program Guide; Pip (Picture-In-Picture) - RCA F27669 User Manual

Key Features Overview

Your TV is equipped with features that will add to your TV viewing experience. The following
information summarizes a few of these features. Chapter 3 provides more information about the
rest of the TV's features and how to use them.

On-screen Program Guide

Description: The GUIDE Plus+ system is an on-screen interactive list of
programs and information that is built into your TV. You can scroll through the
guide to see what's on and tune directly to that program from the guide. You
can also browse programs by category with the sort feature.
When you access the News feature, MSNBC will appear in your video window if
it's available through your TV.
One-Touch VCR Recording is another benefit of the GUIDE Plus+ system. You
don't have to remember to program your VCR or use the menus in your VCR to
set up a recording.
Requirements:
• Remove the Demo Pin from the G-LINK jack.
• Complete the on-screen interactive setup. You'll find detailed instructions in
Chapter 1.
• One-Touch VCR Recording: You must connect the G-LINK cable to the TV
and place one of the wands in front of the remote sensor on the VCR.
• If you have a cable box, connect the G-LINK cable to the TV and place one
of the wands in front of the remote sensor on the cable box.

PIP (Picture-In-Picture)

Description: PIP lets you watch two channels at one time — one channel on
the main screen and the other in a smaller window.
Requirements: Connect audio/video cables to your TV and to another
component that has a tuner (a VCR or a satellite receiver).
Your TV has one tuner, which means it can tune to one channel at a time. You
must set up a second component (VCR or satellite receiver) to act as the second
tuner in order for PIP to work. Chapter 1 and Chapter 5 have
detailed instructions.

Introduction

1