Remote Buttons - RCA F19625 User Manual

Using the Remote

Remote Buttons

ON•OFF When in TV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device
on and off. When pressed twice within two seconds, all devices that are
on will be turned off (this feature only works with most RCA, GE, and
PROSCAN products).
VCR1 Puts the remote in VCR mode and if auto tuning is enabled, it will
turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD Puts the remote in DVD mode and if Auto Tuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if Auto Tuning is enabled, it
will turn on the TV and tune to the correct channel.
LED Red light that indicates programming mode when programming
the remote. Also displays when a valid remote button is pressed.
AUX When pressed, will turn on the RCA, GE, or PROSCAN component
you have programmed it to control. Also turns on the TV if Auto Tuning
is enabled. Puts the remote in AUX mode to control a device that has
been programmed (VCR, RCA audio component, etc.).
SAT•CABLE Puts the remote in SAT•CABLE mode and if Auto Tuning is
enabled, it will turn on the TV and tune to the correct channel.
MUTE Reduces the TV's volume to its minimum level. Press again to
restore the volume.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
VOL< or VOL> Decreases or increases the TV's volume.
SOUND Press once to display the audio processor choice list. Point and
select to choose a different processor or press CLEAR to exit.
GO BACK Returns you to the previous channel.
GUIDE Brings up and exits the GUIDE Plus+ Gold System. When used
with an RCA, GE, or PROSCAN component and in SAT•CABLE mode,
brings up available on-screen guides.
INFO Brings up channel information.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls.
22
LED
ON OFF
VCR1 TV
SAT CABLE
DVD VCR2 AUX
MUTE SKIP
SOUND GO BACK
GUIDE INFO
OK
MENU
CLEAR
1 2 3
4 5 6
7 8 9
WHO INPUT ANTENNA
0
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE