Channel Menu; Time Menu - RCA F19426 User Manual

Using the TV's Menu System
Tip
To enter a number greater than 99, press and hold "1" to enter
the hundreds digit, then press the two remaining numbers.
44
15720240.03 Menu

Channel Menu

Signal Type Displays a choice list that lets you select
the current antenna type. This option does not appear
when the GUIDE Plus+ system is set up.
UHF/VHF Antenna Choose this if you are currently
using an off-air antenna for TV signals.
Cable TV Choose this if you are currently using
cable or a cable box for TV signals.
Auto Channel Search Tells the TV to search
automatically for all the channels available through the
antenna input. When the TV finds an active channel, it
places it in the Normal channel list; inactive channels
(weak stations or channels with no signal at all) will be
removed from the channel list. If you are using a cable
box and have set up the GUIDE Plus+ system, this option
does not appear.
List and Labels Displays a control panel that lets you
edit your Normal channel list and choose a six-character
label for each channel. Follow the on-screen directions to
enter your channels and other information.
Channel # Use the up and down arrows to scroll
up and down through the channels available via your
antenna. You can enter the channel number directly
using the number buttons.
Normal List Only the channels included in the
Normal list are available when you scan up and
down using channel up and down. Use the up and
down arrow buttons to indicate whether the channel
number indicated is included (Yes) or is not included
(No) in the Normal channel list.
Channel Label Use the up and down arrow buttons
to enter a six-character label for each channel. Hold
the button down to scroll quickly through the
characters. The TV can store up to 27 labels in
memory.
Auto Tuning Displays a choice list that lets you set up
the TV to automatically tune to the correct input channel
when you press a component button (VCR1, VCR2, or
SAT•CABLE) if you are using a universal remote. Go to
Chapter 4 for information on ordering a universal remote.

Time Menu

Sleep Timer Displays a control panel that lets you
select the amount of time you want to give the TV before
it shuts itself off.
Schedule Displays a control panel that lets you set up a
schedule for turning the TV on and off automatically.
Reminder: you must turn the schedule On. The on-screen
directions guide you through the steps needed to set the
schedule.
Set Time Displays a control panel that lets you enter the
current time. The on-screen directions guide you through
the steps needed to set the time. If your GUIDE Plus+
system is set up, it will automatically update your time
and this option will not appear.
44
Chapter 3
4/9/02, 1:00 PM