The Front Of Your Tv; Front Input Jacks; Front Panel Buttons; Plug In The Tv - RCA 27V510T User Manual

Connections & Setup

The Front of Your TV

Front Input Jacks

The TV has one set of front audio/video input jacks for your convenience. These
jacks are towards the front of the TV on the side. To access the component you
connected to the front of the TV, press the INPUT button on your remote until
FRNT appears on the screen. The jacks are ideal for connecting a video game
console or a camcorder.
Note: When connecting a component that only has one audio jack, such as some camcorders,
use the TV's AUDIO L/MONO jack to hear the audio.
H-PHONE Allows you to connect headphones to listen to the sound coming from
the TV.
VIDEO Receives video from another component such as a VCR, camcorder, or
video game console.
L/MONO and R AUDIO Receives audio from another component such as a VCR,
camcorder, or video game console.

Front Panel Buttons

If you cannot locate your remote, you can use the buttons on the front of your TV
to operate many of the TV's features.
MENU/OK Brings up the Main menu. In the menu system, it selects highlighted
items.
CH v Scans down through the current channel list. In the menu system, acts like
the down arrow button on the remote control and adjusts menu controls.
CH Scans up through the channel list. In the menu system, acts like the up
arrow button on the remote control and adjusts menu controls.
VOL < Decreases the volume. In the menu system, acts like the left arrow button
on the remote control and adjusts menu controls.
VOL > Increases the volume. In the menu system, acts like the right arrow button
on the remote control and adjusts menu controls.
POWER Turns the TV on and off.

Plug in the TV

Plug the end of the power cord into a grounded wall outlet. Insert the plug
completely into the outlet.

Put batteries in the remote

• Remove the battery compartment cover from the back of the remote by
pushing down on and sliding off the cover.
• Insert 2 fresh "AAA" batteries. Make sure the polarities (+ and -) are aligned
correctly.
• Replace the cover.
6
Graphics contained within this publication are for representation only.
Chapter 1