RCA 15491880 User Manual page 39

Using the TV's Features
l. Press MENU (the 71"MAlNMENlappears).
2 ltighlight Chunneland
press OK on your remote control.
3. llighlight Aztto 7_lHing and press OK.
4 Choose whic]l channel _r_t_ would like to set:
Set VCR 1 Channel Displays a list that lets ynu set up the channel that the
TV tunes to when you press the VCR1
button on
the remote.
Set VCR 2 Channel Displays a list that lets you set up the channel that the
"I*z tunes to when you press the \:CR2 I_utton.
Set DVD Channel I)isplax s a list that lets you select the channel that the
"IV tunes to when you press the !)VD button.
5.
Set SAT/CABLE Channel Displays a list that lets you set up the channel
that the TV tunes to when you press SAToCABLE.
Highlight the choice that matches the way you have the component
connected to this TV, and press OK.
The choices and a brief explanation follow:
Not connected Choose this if you don't have this particular component
connected to the TV. or if you don't want the TV to automatically tune to the
correct channel when you're using this component,
Channel2 (SAT/CABLE only) Component (satellite or cable box) is
connected to the CABLE/ANTENNA jack on the hack of the TV, and you want
the TV to tune to channel 2 when you press the SAT,, CABLE button on the
remote. Reminder: make sure the component's Channel 2/3/4 switch is set to
channel 2. Usually this switch is on the back of the component.
Channel3 Component is connected to the CABLE/ANTENNA jack on the back
of the TV, and you want the TV to tune to channel 3 when you press the
corresponding button on the remote. Reminder: make sure the component's
Channel 3/4 switch is set to channel 3.
Channel 4 Component is connected to the CABLE/ANTENNA jack on the
back of the TV, and you want the "IV to tune to channel 4 when you press the
corresponding button on the remote. Reminder: make sure the component's
Channel 3/4 switch is set to channel 4.
Video Input Component is connected to the VIDEO jack on the back of the
TV and you want the TV to tune to VII) (SVID if you nsed an S-Video cable)
Input Channel when you press the component button.
Note: You should choose tbis,/br your VCR !}"yon connected it to the TV
with audio/video cables.
Chapter 3 37