Get Started; Install Battery; Connect Power; Plug And Set - Philips AJ5030 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Install battery

Warning
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The battery contains chemical substances, so it should
be disposed of properly.
Note
•
You can only use AC power as power supply. The
lithium CR2032 battery is only for back-up purpose.
•
When power is disconnected, the display backlight is off.
When is displayed, replace the battery as
indicated.

Connect power

Caution
•
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the clock radio.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
1
12/24 H TIME ZONE FLIP AL
DST RADIO 1
BUZZ
CLOCK RADIO AJ 5030 VOL

Plug and set

Time has been preset at the factory. When
power is connected, the set time is displayed
automatically.
The built-in lithium battery can maintain clock
setting despite power interruption.

Select time zone

Check if the time of the clock radio is
consistent with the local time. If not, adjust the
time zone settings according to your location.
1
In standby mode, press TIME ZONE.
» The current time zone number blinks
on the display panel.
2
Press TIME ZONE repeatedly to set time
zone.
For China:
China Standard Time (CST)
Xinjiang Time
2
AL
RADIO 2
BUZZ
+8
(Default)
+6
EN
7