Amprobe TMA-21HW User Manual page 25

Hot-wire anemometer
Hide thumbs Also See for TMA-21HW:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Operation Conditions :
Power Supply :
Battery Life :
Probe Dimensions / Weight :
Meter Weight / Dimensions :
Accessories :
. EMC : EN 61326-1.
This product complies with requirements of the following European
Community Directives: 89/336/EC (Electromagnetic Compatibility) and 73/23/
EEC (Low Voltage) as amended by 93/68/EEC (CE Marking). However, electrical
noise or intense electromagnetic fields in the vicinity of the equipment may
disturb the measurement circuit. Measuring instruments will also respond to
unwanted signals that may be present within the measurement circuit. Users
should exercise care and take appropriate precautions to avoid misleading
results when making measurements in the presence of electronic interference.
Altitude up to 2000 meters.
Relative humidity up to 80%RH, non –
condensing.
6 pcs 1.5V size AAA batteries.
Approx. 10 hours.
Wire length : 2.2 meter (7.2 ft)
Probe length : 1.2 meter (3.9 ft)
Probe diameter of tip : 15.0 mm (0.59 in.)
Probe diameter of base : 28.0 mm (1.1 in.)
Probe weight : 165 g (0.36 lbs)
235 g (0.52 lbs)
150(L) x 72(W) x 35(H) mm
5.9(L) x 2.8(W) x 1.4(H) inches
Instruction manual, Batteries, USB cable,
CD software and Carry case.
13

Advertisement

Table of Contents
loading

Table of Contents