Toshiba TOSVERT VF-AS3 Instruction Manual page 18

Mandatory
action
Select an indoor location with good ventilation, and then install the inverter upright on a flat metal plate.
For the positions and sizes of the mounting holes, refer to [6. 2].

Top cover over view
Top cover is including in the package with the inverter.
For frame size A1E, A2E, and A3E
For frame size A4E and A5E
How to install the top cover
1) Top cover is installed before 2 mounting screws on top side are tightened with standard torque
(the screws must be tightened with the torque to support the inverter weight).
Important
2. Installation and wiring
• Carry the inverter with the cover attached, and avoid holding or putting your hands in the wiring
holes.
Otherwise you can have your hands pinched and injured.
• Install the inverter at a place which can support the unit's mass.
If you install the inverter at a place which does not support the unit's mass, the unit will fall,
resulting in injury.
• Install the mechanical brake when it is necessary to hold a motor shaft.
A brake function of the inverter cannot perform mechanical hold, and it results in injury.
• For UL type 12, top cover must be installed.
2-4
E6582162c