Flex System FC3172 2-port 8Gb FC Adapter
Product Guide
The Flex System™ FC3172 2-port 8Gb FC Adapter enables high-speed access for Flex System compute
nodes to connect to a Fibre Channel storage area network (SAN). This adapter is based on the proven
QLogic 2532 8Gb ASIC design and works with the 8 Gb and 16 Gb Flex System Fibre Channel switches
and pass-thru modules.
Figure 1 shows the Flex System FC3172 2-port 8Gb FC Adapter.
Figure 1. Flex System FC3172 2-port 8Gb FC Adapter
Did you know?
The performance bottleneck with Fibre Channel storage typically exists in the switching. By moving to 8 Gb
adapters and switches, you can optimize the bottleneck to the storage controller, where it can be managed
by expanding the disks attached to storage. When compared to the previous-generation 4 Gb adapters, the
new-generation 8 Gb adapters double the throughput speeds for Fibre Channel traffic. As a result, you can
manage increased amounts of data and possibly benefit from a reduced hardware expense.
The adapter connects to the midplane directly, without having to use cables or small form-factor pluggable
(SFP) modules. By eliminating these components for up to 14 servers, the resulting savings alone can cover
the investment in the chassis.
Click here to check for updates
Flex System FC3172 2-port 8Gb FC Adapter
1