Table of Contents
Advertisement
Installation Guideline
The installation must be in compliance with the National Electrical Code, your local electrical
and plumbing codes.
1. Make sure the appliance is intact, and the fittings are complete.
2. Do not install the unit in a room where there is a chance of freezing.
3. Please make sure the main power supply, water pressure, grounding condition, ammeter and
wire reach the standard of installation requirement.
4. The appliance must be connected to properly grounded dedicated branch circuits of proper
voltage rating. Ground must be brought to the "ground" at the circuit breaker panel.
5. This appliance MUST be permanently connected to the fixed circuit breaker. If you don't use
the heater, please switch o the circuit breaker.
6. DO NOT install this appliance near to tinder or strong magnetic field place. The unit must only
be mounted in a VERTICAL position near by the water fittings. Please electrify try the machine
after getting through waterway.
7. Mount the unit onto a flat section of wall, well away from any potential splashes of water or
spray.
8. Position the unit upright with all plumbing connections at the bottom of the unit.
Installation Method
•Mounting on The Wall
1. Locate an appropriate place on a section of wall as above mentioned.
Fig 1 Front and back of the appliance.
Fig 2 Remove the bracket from the appliance.
Hide quick links:
Advertisement
Table of Contents
