Recording A Five-Second Still Image (Snapshot); Still Recording - RCA ProV950HB User Manual

Useful Features for Camera Recording
Recording a Five-Second Still
Image (Snapshot)
You can record a still picture (snapshot) for about
five seconds with normal sound simply by
pressing the SNAP button.
This is useful when you want to record a scene like
a photograph.
1
Refer to page 14 to display MENU-PAGE
(Camera mode).
PressAon the operation button (
select "PHOTO SNAP" and then press C on
the button to select "SNAP". Press the
MENU button to turn off the menu.
Operation Button
S
E
T
2
Press the SNAP button while the camcorder
is in Recording Standby mode.
3
Press the REC START/STOP button.
• The indicator is displayed during
snapshot recording.
E
X
T
E
N
D
A still image of the subject will be recorded
for about five seconds, then the camcorder
automatically enters Recording Standby
mode.
Notes:
• The image on the monitor will also be frozen
during snapshot recording.
• If the electronic high-speed shutter is used with
the snapshot function, you can record a
complete still image without any blurring.
• The picture quality of the snapshot is slightly
lower than normal picture quality.
) to
ITEM
1 2 3 4
PAGE
1.5 2.0 2.5
EXTEND ZOOM
X
PHOTO SNAP SNAP STILL
S
E
T
PREV. PAGE
ITEM
SNAP
SNAP
Button
BLC
D
I
S

Still Recording

You can record still images of subjects with normal
sound.
You will find it useful when you want to record a
shot of a tourist information board during
sightseeing.
1
Refer to page 14 to display "MENU-PAGE
(Camera mode). PressAon the
select "PHOTO SNAP" and then press B on
3
the button to select "STILL".
2
Press the SNAP button while the camcorder
is in Recording Standby mode.
3
Press the REC START/STOP button.
4
To return to normal recording, press the
SNAP button again in the Still Recording
mode.
Notes:
• Once the Still Recording mode is set, the
camcorder will remain in that mode until it is
canceled, even when switching between
Recording mode and Recording Standby mode.
• The picture quality in this mode will be slightly
lower than normal pictures.
Caution:
• Do not keep the camcorder in Still Recording
mode too long. The monitor may hold an after-
image. Turn off the power and wait for a while.
The monitor will return to normal.
To Stop Snapshot or Still
Recording
Press the REC START/STOP button.
button to
ITEM
1 2 3 4
PAGE
1.5 2.0 2.5
EXTEND ZOOM
X
SNAP STILL
PHOTO SNAP
S S
E E
T T
PREV. PAGE
ITEM
"
3
48